Quintum-technologies Call Routing Server Manual de usuario descargar pdf (Pagina 40)

P/N 480-0028-00-00 5-3

Chapter 5: Configure via Command Line Interface (CLI)

Configuration

ether

Description:

Enables you to configure the Ethernet Port IP Configuration, Ethernet Port IP

Address and Ethernet Port Subnet Mask, as well as displays the current Ether

net Port IP address and Subnet mask already configured.

When the unit is initially shipped, the IP address is set to 0.0.0.0.

Two Ethernet ports are supported: Ether 0: supports 10/00, Ether 1: supports

10/100/1000.

NOTE: Ethernet port 2 is reserved for future use.

Cmd Type:

Command.

Prompt Level:

Main Routing Server prompt.

Syntax:

ether {1|2}. Displays ethernet statistics for the given ethernet port.

ether {1|2} ip {ipaddress}. Standard IP address that you enter for the given eth-

ernet port.

ether {1|2} netmask {netmask}. Standard subnet mask that you enter for the

given netmask port.

Availability:

All Releases of Tenor Routing Server

Examples:

Routing Server> ether0

Routing Server> ether 1 ip 192.168.8.29 - sets the IP address to 192.168.8.29.

Routing Server> ether 1 netmask 192.168.8.29 - sets the netmask to 192.168.8.29.

Sample Display:

Sample for ether0 command:

Ethernet Port 0 Configuration

IP Address : 192.168.2.20

Subnet Mask: 255.255.255.0

Guidelines:

To change this IP address initially, see Chapter 3: Using the LCD front panel/

Setting IP address.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 69 70

Sin comentarios

Quintum-technologies Call Routing Server Manual de usuario Pagina 40